.jpg)
PERFORMANCE
– High performance, monocrystalline solar cells deliver a module series effciency of up to 15.5%, reducing installation costs and maximizing the kWh output per unit area.
– Tight positive power tolerance of -0W to +5W ensures modules are delivered at or above rated power, improving system performance through the reduction of module mismatch loss.
185W MONOCRYSTALLINE SOLAR MODULEElectric Characteristics (STC)
|
Type |
RM18524M |
|
Maximum power(Pmax) |
185W |
|
Voltage at Pmax(Vmp) |
36.9V |
|
Current at Pmax(Imp) |
5.02A |
|
Open-Circuit Voltage(Voc) |
45.1V |
|
Short-Circuit Current(Isc) |
5.48A |
|
Maximum Systerm Voltage |
IEC:1000V / UL:600V |
|
Maximum Series Fuse Rating |
10A |
|
NOCT |
45±2%/℃ |
STC*(Standard Testing Conditions):Irradiance 1000W/㎡.Module Temperature25℃. Air Mass 1.5
185W MONOCRYSTALLINE SOLAR MODULE Mechanical Characteristics
|
Solar Cells |
72(6×12) monocrystalline cells125mm |
|
Front Cover |
3.2mmthick low iron temperature glass |
|
Back Cover |
TPT(Tediar-PET-Tediar) |
|
Encapsulant |
EVA(Ethylene vinyl acetate) |
|
Frame |
Anodized aluminum alloy, double wall |
|
Diodes |
6 Bypass diodes serviceable |
|
Junction Box |
IP65 rated, TUV certification |
|
Connector |
MC4 or compatible connector |
|
Cables |
Length:1000mm,/Section:4.0mm2 |
|
Dimension |
1580×808×40mm |
|
Weight |
15.6Kgs |
|
Max Load |
Certified to 5400Pa |
QUALITY & RELIAbILITY
– Robust, corrosion resistant aluminum frame independently tested to withstand wind and snow loads of up to 2400Pa and 5400Pa,respectively,ensuring mechanical stability.
– Manufacturing facility certifed to ISO9001 Quality Management System standards.
– Module packaging optimized to protect product during transportation and minimize on-site waste.
WARRANTIES
– 5 years for product defects in materials and workmanship
– 12 years for 90% of warranted minimum power
– 25 years for 80% of warranted minimum power
English 
Spanish 
中文 
Deutsch
Español
Français
Italiano
Português
Pусский
العربية